Installation

Option 1

This is the preferred position of all Braille Signage.
Position the leading edge of the Braille Sign between 50mm & 300mm from the architrave.
The Braille must be positioned between 1250mm & 1350mm from the floor surface.

Option 2

The sign is to be centered on the door when option 1 is not possible.
The Braille must be positioned between 1250mm & 1350mm from the floor surface.

Download a “PDF” version of the installation instructions HERE

Surface Preparation

We supply all our stock signs with Biolink – 4412HT or 1000R Double sided tape, these are high quality double sided tapes,
but it is the responsibility of the installer to decide if the double sided tape is suitable for the substrate the signs are intended to be installed on.

If it is decided that double sided tape is not suitable, we can supply signs free of double sided tape and the signs can then be applied by other means.

We recommend all surfaces be cleaned with acetone & a clean rag prior to installing signs.
Double Sided tape is Pressure Sensitive & must be pressed firmly onto the substrate it is applied to achieve maximum adhesion.